公车系强女奷校花雪柔,久久综合无码中文字幕无码,美女最大胆人体艺术,暖暖视频在线观看免费最新

您好,歡迎光臨萊州聚峰機械有限公司官方網站!

服務熱線

400-879-1999

你所在位置: 首頁 >> 新聞資訊 > 行業資訊
行業資訊

混凝土攪拌車無法啟動是什么原因?

來源:http://www.mothernature2u.com/ 時間:2022-03-16

混凝土攪拌車使用起來多功能既方便,也不用擔心受到場地限制,是目前來最歡迎的一類攪拌車,因為會被大家經常使用,所以使用時間越長,出現問題也會變多。
The concrete mixer has multiple functions, which is convenient to use, and there is no need to worry about being limited by the site. It is the most popular type of mixer at present. Because it will be used frequently, the longer it is used, the more problems will appear.
在使用的過程中會出現一系列的問題,列如無法啟動,這是怎么回事呢?
In the process of using, a series of problems will appear. If the column cannot be started, what's going on?
一、如果在啟動的時候只能聽到啟動機電磁發出聲音,就是曲軸轉不動,這種情況極有可能是蓄電池斷格造成的。
1、 If only the magnetic sound of the starter can be heard when starting, the crankshaft will not rotate. This situation is most likely caused by the broken grid of the battery.
二、如果極樁、極樁夾子接觸不良而發熱燒損,這時啟動移動式自動上料攪拌車就會出現突然轉動無力,并伴有燒橡膠氣味或蓄電池處冒煙現象。
2、 If the pole pile and pole pile clamp are in poor contact and are heated and burned, then the mobile automatic feeding mixer will suddenly rotate weakly, accompanied by the smell of burning rubber or smoke from the battery.
四、如果啟動時只有輕微“嗒”的一聲,之后就再沒有任何反應時,就可以是啟動繼電器發卡出了問題。
4、 If there is only a slight "click" when starting, and there is no response after that, there can be a problem with the card issuing of the starting relay.
五、當飛輪齒圈的嚙合切入面變形的時候,就會出現啟動時啟動機驅動齒輪與發動機飛輪齒圈會發出撞擊的空轉聲。
5、 When the meshing cut-in surface of the flywheel ring gear is deformed, there will be an idle sound of impact between the driving gear of the starter and the flywheel ring gear of the engine during startup.
六、當啟動機電磁開關的保持線圈錯接在了電源接線柱上或鑰匙開關上的3根線接錯時,電源總開關一接通,就會出現啟動機驅動齒輪就和飛輪齒圈嚙合在一起轉動的現象。
6、 When the holding coil of the starter electromagnetic switch is wrongly connected to the power terminal or the three wires on the key switch are wrongly connected, as soon as the main power switch is connected, the starter drive gear will mesh and rotate with the flywheel ring gear.
上一篇:攪拌車怎樣操作才能省油?
下一篇:小型混凝土攪拌車使用壽命什么因素影響?
tag:混凝土攪拌車,小型混凝土攪拌車,全自動混凝土攪拌車
當前位置: 首頁 - 新聞資訊 > 行業資訊

混凝土攪拌車無法啟動是什么原因?

作者:中科聚峰混凝土攪拌車廠家 時間:2022-03-16

混凝土攪拌車使用起來多功能既方便,也不用擔心受到場地限制,是目前來最歡迎的一類攪拌車,因為會被大家經常使用,所以使用時間越長,出現問題也會變多。
The concrete mixer has multiple functions, which is convenient to use, and there is no need to worry about being limited by the site. It is the most popular type of mixer at present. Because it will be used frequently, the longer it is used, the more problems will appear.
在使用的過程中會出現一系列的問題,列如無法啟動,這是怎么回事呢?
In the process of using, a series of problems will appear. If the column cannot be started, what's going on?
一、如果在啟動的時候只能聽到啟動機電磁發出聲音,就是曲軸轉不動,這種情況極有可能是蓄電池斷格造成的。
1、 If only the magnetic sound of the starter can be heard when starting, the crankshaft will not rotate. This situation is most likely caused by the broken grid of the battery.
二、如果極樁、極樁夾子接觸不良而發熱燒損,這時啟動移動式自動上料攪拌車就會出現突然轉動無力,并伴有燒橡膠氣味或蓄電池處冒煙現象。
2、 If the pole pile and pole pile clamp are in poor contact and are heated and burned, then the mobile automatic feeding mixer will suddenly rotate weakly, accompanied by the smell of burning rubber or smoke from the battery.
四、如果啟動時只有輕微“嗒”的一聲,之后就再沒有任何反應時,就可以是啟動繼電器發卡出了問題。
4、 If there is only a slight "click" when starting, and there is no response after that, there can be a problem with the card issuing of the starting relay.
五、當飛輪齒圈的嚙合切入面變形的時候,就會出現啟動時啟動機驅動齒輪與發動機飛輪齒圈會發出撞擊的空轉聲。
5、 When the meshing cut-in surface of the flywheel ring gear is deformed, there will be an idle sound of impact between the driving gear of the starter and the flywheel ring gear of the engine during startup.
六、當啟動機電磁開關的保持線圈錯接在了電源接線柱上或鑰匙開關上的3根線接錯時,電源總開關一接通,就會出現啟動機驅動齒輪就和飛輪齒圈嚙合在一起轉動的現象。
6、 When the holding coil of the starter electromagnetic switch is wrongly connected to the power terminal or the three wires on the key switch are wrongly connected, as soon as the main power switch is connected, the starter drive gear will mesh and rotate with the flywheel ring gear.

截屏,微信識別二維碼