混凝土攪拌車大家或許都見過，而它的操作起來可沒有那么簡單了，不如我們就先一起看看，有助于您的混凝土攪拌車正常運作。
You may have seen the concrete mixer, but its operation is not so simple. Let's take a look at it first to help your concrete mixer operate normally.
1、混凝土攪拌車啟動前，應將攪拌操縱桿放在“空檔”位置。
1. Before starting the concrete mixer truck, place the mixing control lever at the "neutral" position.
2、啟動后，應將攪拌操縱桿放在“卸料”位置，放去筒內積水。
2. After starting, place the mixing control lever at the "unloading" position to drain the accumulated water in the cylinder.
3、運輸前，卸料槽必須固定在“行駛”位置，防止擺動。
3. Before transportation, the discharge chute must be fixed in the "driving" position to prevent swinging.
4、裝料時，攪拌操作桿應放在“裝料”位置。
4. When loading, the mixing lever shall be placed at the "loading" position.
5、人進入筒內清除砼結塊時，應將車輛熄火，拔下電門鑰匙，筒外設人監護。
5. When people enter the cylinder to remove concrete caking, they should turn off the vehicle, pull out the switch key, and assign someone outside the cylinder to monitor.
6、搞好文明施工，桶內多余材料不準隨便亂倒。卸料后必須對攪拌筒、料槽、托輥等部位進行清洗。
6. Civilized construction shall be carried out. Excess materials in barrels shall not be dumped randomly. After unloading, the mixing drum, material trough, idler and other parts must be cleaned.
7、混凝土攪拌車啟動前應對機械系統各部位認真進行檢查，確認良好后方可啟動。
7. Before starting the concrete mixer, each part of the mechanical system shall be carefully checked and can be started only after it is confirmed to be in good condition.
8、操作操縱桿時，應在“空檔”位置稍作停留后方可動至下一個位置。
8. When operating the control lever, stay in the "neutral" position for a while before moving to the next position.
所以說混凝土攪拌車正常運作離不開這八點操作，希望能夠給您幫助，更多事項就來我們網站http://www.mothernature2u.com咨詢了解吧！
Therefore, the normal operation of the concrete mixer can not be separated from these eight operations. I hope I can help you. Please come to our website for more information http://www.mothernature2u.com Ask and understand!
